Enel X Sun Plug&Play allows you to produce renewable energy for your home.
Enel X Sun Plug&Play is the innovative photovoltaic for apartments that can produce the energy to ensure the consumption of your refrigerator, your TV or your air conditioner.
The system, with Enel X registered design, has a small footprint and can be installed quickly and easily on the balcony of the house or under the windows. It connects simply with a dedicated electric plug.
Details
The photovoltaic system has a nominal power of 300 Wp, the solution includes:
- 1 Jolywood photovoltaic module with power 340 Wp
- Zucchetti Micro Inverter with integrated monitoring system (Conventional Warranty 10 years)
- Support structure supplied by Enel X equipped with bracket for railing or masonry parapet/wall
Monitoring
Thanks to a wattmeter installed in the system protection panel, the production of the system will be recorded, which you can view at any time.
Requirements
- Availability of a dedicated and visually identifiable electrical outlet compared to the other sockets within the user's electrical system (where the qualified installer has provided a dedicated circuit starting from the distribution panel).
- In the case of a balcony with railing: the thickness of the railing (including the handrail) must be at least 30mm and maximum 120mm. If the thickness is between 120mm and 150mm, the purchase of the self-supporting kit is mandatory.
- In the case of masonry parapet/wall: in case of installation under the window, the width of the opened window must be at least 1.20m and the window must be placed more than 1m from the ground. In case of installation on a masonry balcony, the thickness of the parapet must be at least 100mm (solid brick masonry) / 150mm (hollow brick masonry).
- Prior communication to the condominium regarding the installation of a photovoltaic system intended for the service of your apartment, on the railing / parapet of your balcony, in this supported by the regulatory provisions, pursuant to art. 1122 bis of the Civil Code.
- Once your system has been installed, you will have to fill in and send the Single Communication (attached to ARERA Resolution no.315 / 2020 / R / eel) to your local electricity distributor. To find out how to send the Single Communication, please contact or visit the website of your local distributor.